Standard Horizon CP1000C - Manual (Page 37)

GPS chartplotters Page 39
Figure 5.1.1a - Moving Mark or Waypoint (II)
5.2 MARK/WAYPOINTS LIST
The MARK/WAYPOINTS LIST shows all the Marks and Waypoints that have been stored
into the GPS chartplotter. This page also allows you to:
ICON Allows sorting by icon type
FIND Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob
LOCATE Shows the position of a Mark or Waypoint on the Chart Page
EDIT Allows you to edit a previous stored Mark or Waypoint
NEW MARK Allows entering in Marks, editing icon type and position
MODE This selection controls how the Marks or Waypoints are shown on the Chart Page. Selections are:
a. ICON-only icon (no name) is shown
b. HIDE-All Marks or Waypoints are hidden
c. SHOW ALL-All Marks or Waypoints are shown
d. ICON ALL-All Icons are shown without name
SORT Sort the name of the Mark or Waypoint in ascending or descending order
SEND Sends the stored points to a external device (PC) capable of listening to NMEA WPL sentence.
RECEIVE Receive the points from an external device that is capable of sending WPL sentence.
NOTE
The SEND and RECEIVE functions are usually used by navigation programs running on a Personal
Computer example Nobeltech.
Figure 5.2 - Mark/Waypoints List
5.3 CREATING A NEW MARK WITH THE MARK/WAYPOINTS LIST
NOTE
This function is very useful if you have a list of Marks that you want to enter into the chartplotter.