Sony STR-DA90ESG - Manual (Page 14)

Hooking Up the System
14
AC Hookups
Connecting the AC power cord
Connect the AC power cord from this receiver and
from your audio/video components to a wall outlet.
If you connect other audio components to the
SWITCHED AC OUTLET(s) on the receiver, the
receiver can supply power to the connected
components so you can turn on/off the entire system
when you turn on/off the receiver.
Caution
Make sure that the power consumption of the component(s)
connected to the receiver’s AC outlet(s) does not exceed the
wattage indicated on the rear panel. Do not connect high-
wattage electrical home appliances such as electric irons,
fans, or TVs to this outlet.
to a wall
outlet
SWITCHED AC OUTLET(s)
Before using for the first time
Be sure to clear the receiver’s memory before using
for the first time.
1
Make sure the POWER is set to off.
2
While holding down the DISPLAY and PANEL
UP/DOWN buttons, press POWER to turn on
the receiver.
“ALL CLEAR!” appears in the display.
Note
Clearing the receiver’s memory erases all preset radio
stations and IR code settings etc.
POWER DISPLAY
PANEL
UP/DOWN