Sony STR-DA90ESG - Manual (Page 4)

4
Welcome!
3
1
FUNCTION
USER SUB INPUT
SETUP SOUND
( ) 0 p P = +
2
Â
µ
M m
º ‚
¢
¢
¢ ¢
≠ ±
· ∏ π
Video signal
Thank you for purchasing the STR-DA90ESG Sony FM
Stereo/FM-AM Receiver.
Your new receiver is an audio/video control center
with a unique interface. When you connect the
receiver to your TV, an on-screen display (shown
below) appears and lets you operate the various
connected audio/video components with this
receiver’s remote.
Also, the on-screen display lets you control any other
device that can be controlled by an infrared remote
control, such as air conditioners.
Understanding How the Receiver Works
1 The remote emits an infrared (IR) signal when you
press direction control button (see 1 below).
2 This controls the movement of the pointer (hand-
shaped icon) in the on-screen display (see 2 below).
3 When you move the pointer to an on-screen icon,
and press the center of the direction control button
on the remote, the infrared (IR) emitter on the front
panel transmits the corresponding IR control code to
the respective component (see 3 below).
For USA
and Canada
(RM-H501)
For
Australia
(RM-VR101)
TV (monitor)
Video signal (Input from source
components combined with on-screen
display)
STR-DA90ESG
IR emitter
IR receptor
IR control codes
LD player, etc.
VCR, etc.
Video signal
About the color system for video input
This unit is compatible with the following color
systems.
USA and Canadian model : NTSC
Australian model : PAL*
* Although the normal OSD is displayed in color, when
video signals are input from other components the
OSD is displayed in black and white.