Sony STR-DA90ESG - Manual (Page 35)

35
Getting Started Sound Adjustment
EXIT
MODE
O N
O N
O N
SOUND FIELD
BASS BOOST
DIRECT PASS OFF
OFF
OFF
SUR EQ
THEATER
EQUALIZER EDIT
LEVEL :
CHANNEL
dB
RETURN STANDARD EXIT
BASS
FLAT
+10
b B
FREQ : kHz 1.0
100 10k
+10
–10
1k
TREBLE
DOWN
UP
FRONT
EQUALIZER EDIT
LEVEL :
CHANNEL
dB
RETURN STANDARD EXIT
BASS
FLAT
+10
FREQ : kHz 1.0
100 10k
+10
–10
1k
TREBLE
b B
DOWN
UP
REAR
Notes
• All sound fields can be used with Dolby Digital (AC-3)
sound sources.
• The EFFECT parameter allows you to adjust the overall
presence of the sound field.
• When DIRECT PASS is set to ON, only the R LEV, W LEV,
and C LEV parameters can be adjusted.
Adjusting the equalizer parameter
Adjust the equalization (bass or treble) of the front,
center and rear speakers for optimum sound.
The following adjustments effect all sound fields
simultaneously.
1
While playing a component, click SOUND in the
main menu.
2
Click a sound field genre, then click MODE
repeatedly until the mode you want appears.
3
Click EQ.
4
Click CHANNEL to select the speakers you want
to adjust (FRONT, CENTER or REAR).
5
Click BASS or TREBLE to select a frequency band.
Then click UP or DOWN to raise or lower the
level of the selected frequency.
Click B or b to select specific frequencies within
the frequency band.
6
Repeat steps 4 to 5 as necessary.
To start adjustment with a flat equalizer curve
Click FLAT.
To reset the equalizer to the factory settings
Click STANDARD.
Note
You may hear some noise as you adjust the parameters.
(continued)