Sony STR-DA90ESG - Manual (Page 54)

54
Front Panel Operations (Remote Short-cuts: USA and Canada only)
Set up parameters
p SPEAKER SETUP (see pages 22 to 23 for details)
Front speaker
Initial setting is : FRONT SP [LARGE]
Center speaker
Initial setting is : CENTER SP [LARGE]
Rear speaker
Initial setting is : REAR SP [LARGE]
Rear speaker place
Initial setting is : REAR SP [SIDE]
Sub woofer
Initial setting is : SUB WOOFER [ YES ]
p FUNCTION HOOKUP
VIDEO1, VIDEO2, LD/DVD, TV/DBS, TAPE, DAT/MD, CD,
PHONO
Initial setting is : CONNECT
These settings let you delete the names of unconnected
components from the function lists.
• CONNECT displays the name of the respective
component (jacks).
• NO deletes the name of the respective component (jacks).
Notes
• When a function is set to “NO”, it cannot be selected.
• If an S-LINK signal (Control A1, Control-S) is input to
the S-LINK jack from a component whose function was
set to “NO”, the function will automatically switch to
“CONNECT” and that function will be selected.
• When using the remote, “NO CONNECTION” is
displayed if you select a function that was set to “NO”.
Customizing the Receiver
Operations
The menu operations allow you to customize various
aspects of the receiver to suit your listening
environment, your speakers, your components, and
your personal preferences.
For the on-screen speaker setup operations, see page
22.
1
Open the control panel and press SET UP.
“SET UP” appears in the display.
2
Press SET UP repeatedly to display one of the
following menus:
SPEAKER SETUP
FUNCTION HOOKUP
OTHER SETUP
3
Use digital processing control buttons (V/v) to
select the parameter you want.
4
Use digital processing control buttons (B/b) to
adjust the parameter.
5
Repeat steps 2 and 4 to make all necessary
adjustments.
6
Press SET UP twice to exit the set up mode.