Sony STR-DA90ESG - Manual (Page 55)

55
Getting Started Front Panel Operations (Remote Short-cuts: USA and Canada only)
Indexing
Using the index functions, you can specify names up to
8 characters long for each component and preset radio
station.
For the on-screen operations, see page 39.
1
• For the components
Turn FUNCTION to select a component.
• For the preset stations
Tune in a preset station.
2
Open the control panel and press DPC MODE
repeatedly until the INDEX indicator lights up.
3
Create a name using the digital processing control
buttons.
Press V or v to select a character, and then press b
to move the cursor to the next position.
The name is stored automatically.
To insert a space, press V or v until a blank space
appears in the display. The space appears
between " and A.
If you’ve made a mistake, press B or b repeatedly
until the character you want to change flashes.
Then select the right character.
4
Repeat steps 1 to 3 to assign index names to other
components or stations.
z
To switch the display
Each time you press DISPLAY, the display switches
between the index name n component name (or
frequency) n track memo*
1) n disc memo* 1) .
• If the Control-A1 display mode is set to “AUTO” or
“FIX” when listening to a Control-A1 compatible tape
or DAT deck, the Control-A1 operations are
displayed together with the index name and
component name.
Example: TAPE [PLAY] n index name [PLAY]
* 1) If the Control-A1 display mode is set to “FIX” when
listening to a Control-A1 compatible CD player or
MD deck, you can display the disc memo and track
memo information in addition to the Control-A1
operations.
Example: CD [PLAY] n index name [PLAY] n
disc memo* 2) n track memo* 3)
* 2) Up to 13 characters for CD (15 for MD).
* 3) Up to 14 characters for CD (15 for MD).
Note
The display mode returns to FREQUENCY automatically
when you press TUNING +/–.
p OTHER SETUP
Center speaker delay
Initial setting is : CENT. DELAY 0
See page 36 for details.
Rear speaker delay
Initial setting is : REAR DELAY 5
See page 36 for details.
Dimmer level
This setting lets you select brightness of the display on the
front panel.
• You can select between four different settings.
Control A1 display
Initial setting is : CTRL A1 [AUTO]
This setting lets you specify the display mode for Control A1
components.
• AUTO displays “PLAY”, “STOP”, “PAUSE” or “REC” for
about 8 seconds when the operation switches.
• FIX displays “PLAY”, “STOP”, “PAUSE”, “REC” or the
contents of a disc or track memo of a CD or MD at all
times.
• OFF turns off the operation status display.
Notes
• This setting is only effective when the IR code setting is
set to Sony Control A1.
• If the disc or track memo contains a character that the
receiver cannot display, “.” appears for that character.