Solid State Logic Multichannel Digital Audio Interface MadiXtreme - Manual (Page 36)

Macintosh
To update the MadiXtreme firmware, open the MadiXtreme Preferences pane (click the Apple (  ) icon and select System
Preferences…. then in the System Preferences window click the MadiXtreme icon).
In the MadiXtreme Preferences pane, click the Update Firmware button and follow the on-screen instructions. You will be
prompted to locate the firmware file that you want to load into the card. Once the firmware update process has completed
the computer must be shutdown and restarted in order to complete the update process.
It is most important that power be removed from the computer for a short period after the firmware has been
updated. This is because MadiXtreme only loads the new firmware image into the hardware on power-up and if power
is not removed your new image will not be loaded…
Page 30