Solid State Logic Multichannel Digital Audio Interface MadiXtreme - Manual (Page 44)

Selecting an Input for the Track/Channel Strip
In order to hear the input signal an input must be selected for
the channel strip. Click the input field near the top of the track
channel strip to display a selection menu.
If you are receiving a stereo test signal via MadiXtreme inputs
1 and 2, highlight SSL Soundscape ASIO. A submenu will be
displayed: click Stereo SSL Soundscape ASIO STR 1 Madixtreme 1
in the submenu.
Selecting an Output for the Track/Channel Strip
Next, select the track output by clicking the output field
near the bottom of the track channel strip.
Select SSL Soundscape ASIO STR 1 Madixtreme 1 to hear
the signal transmitted via the MadiXtreme’s first output
pair.
Monitoring the Signal
Click the Input Echo button to hear the signal going through the channel strip
prior to recording
Recording
When the signal is passing through the channel, you can record it by clicking the Track Arming button in the track channel
strip, then the Record button in the Transport:
Page 38