Solid State Logic Multichannel Digital Audio Interface MadiXtreme - Manual (Page 39)

Overview
The Nuendo Mixer is divided into three main sections (press function key
F3
to display the Mixer):
• Input channel strips (or ‘input busses’), to the left of the mixer
• Output channel strips (or ‘output busses’), to the right of the mixer
• Audio channel strips (in the centre section of the mixer)
Input and output channel strips are created automatically when an input or output bus is created in the VST Connections
window. They are assigned automatically and incrementally to the MadiXtreme’s inputs and outputs, but can be reassigned
manually if required.
Audio channel strips are created automatically in the centre section of the mixer when audio tracks are created in the
current Nuendo Project. These audio channel strips can receive signal from any input bus channel strip or from the audio
track they were created for, and transmit it to any output channel strip.
Page 33
Centre Section
(with Four Audio Channel Strips)
Input Channel Strip Output Channel Strip