Safety and installation considerations, Disclaimer, Trademarks – Solid State Logic Multichannel Digital Audio Interface MadiXtreme User Manual

Page 8: Website

Advertising
background image

Safety and Installation Considerations

This section contains definitions, warnings, and practical information to ensure a safe working environment.

Please take time to read this section before installing or using this unit. Please do not dispose of these instructions.

Disclaimer

This manual has been written with great care and attention to detail, and we have attempted to cover every operational

aspect of the SSL MadiXtreme. However, it is not a contractual document. Solid State Logic and/or the writer(s) of this

manual cannot be held responsible for any loss or damage arising directly or indirectly from any error or omission in this

manual.

Trademarks

All trademarks are the property of their respective owners and are hereby acknowledged.

Website

The URL for the Solid State Logic website is:

www.solid-state-logic.com

General Safety

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Do not expose this apparatus to rain or moisture.

• Do

not

block

any

ventilation

openings.

Install

in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators,

heat registers, stoves or other apparatus (including

amplifiers) that produce heat.

• There are no user-adjustments, or user-serviceable items,

on this apparatus.

• Adjustments or alterations to this apparatus may affect

the performance such that safety and/or international

compliance standards may no longer be met.

Caution

• To reduce the risk of electric shock, do not perform any

servicing other than that contained in these Installation

Instructions unless you are qualified to do so. Refer all

servicing to qualified service personnel.

Installation Notes

• When installing this apparatus, place the host system

into which it is to be installed on a secure level surface.

• To prevent damage from static electricity when installing

this apparatus, either to the host system or to this

apparatus, always take proper anti-static precautions.

Always use an anti-static wristband. If in doubt, please

refer to qualified service personnel.

• Take care of rough or sharp edges when accessing the

inside of the host system.

• Never install or remove this apparatus whilst the host

system is powered. Always remove the power cord from

the host system prior to accessing this apparatus.

• If in doubt about installing this apparatus, please refer to

qualified service personnel.

Page 2

Advertising