Solid State Logic Multichannel Digital Audio Interface MadiXtreme - Manual (Page 46)

Overview
The Samplitude Mixer is divided into three main sections (on the keyboard, press
M
to display the Mixer).
For clarity, we have used the buttons on the left of the Mixer to hide the EQ Insert and Aux sections of the channel
strips.
The Samplitude Mixer features one audio channel strip for each audio track in the current project. By default, the output
of each audio channel strip is routed to the Master section – this can be changed if required.
To get started, create a new Samplitude project by clicking New Virtual Project (VIP) under the File menu. Name the
project in the resulting dialogue window and click OK to confirm and close the window.
By default, the project will have four stereo audio tracks and corresponding audio channel strips. We want to record our
test stereo signal to track 1.
Page 40
Master Section Channel Strips Global
Buttons