Solid State Logic Multichannel Digital Audio Interface MadiXtreme - Manual (Page 43)

Overview
The Sonar Console is divided into three main sections (on the keyboard, press
Alt
&
3
to display the Console).
For clarity, we have used the buttons on the left of the console to hide the EQ Plot, EQ, FX and Send sections of
the channel strips.
• Tracks Section: includes one channel strip for each track in the project
• Buses Section: includes the Master Bus strip on the left
• Mains Section: includes direct stereo outputs assigned to the audio hardware
When Sonar 7.0 Producer Edition is started, a dialogue offers the option to create a new project. The default configuration
of the new project is two stereo audio tracks and two MIDI tracks. This is a good way to start experimenting with
MadiXtreme and was used for writing this manual, so please follow the prompts to create a new project and then proceed
to the sections overleaf.
Page 37
Busses Section
(Master Bus on the Left)
Tracks Section
(Two Audio Tracks Shown)
Mains Section
(Two Stereo Outputs Shown)