Sony VPH-D50HTM - Manual (Page 29)

29
(GB)
CONTRAST
Adjusts the picture contrast.
The higher the setting, the greater the contrast.
The lower the setting, the lower the contrast.
BRIGHT
Adjusts the picture brightness.
The higher the setting, the brighter the picture.
The lower the setting, the darker the picture.
COLOR
Adjusts color intensity.
The higher the setting, the greater the intensity.
The lower the setting, the lower the intensity.
HUE
Adjusts skin tones.
At high settings, the picture becomes greenish.
At low settings, the picture becomes purplish.
SHARP
Adjusts the picture sharpness.
The higher the setting, the sharper the picture.
The lower the setting, the softer the picture.
The PIC CTRL menu is used for adjusting the picture.
Items that can be adjusted are highlighted in green.
You cannot select the items indicated in white.
Page 1
Page 2
VIDEO MEMORY
Selects a memory number of the adjusted picture
levels.
Select a number from 1 to 10 in the pop-up menu, then
the picture levels that have been adjusted will be stored
in the number of the projector's memory.
If you want to reset the data to the input signal, select
OFF.
The items to be stored in the VIDEO MEMORY are
shown in the table of the memory architecture under
“Input memory” (except for the items, “clamp
position” and “registration” ).
C O N T R A S T : 8 0 V I D E O
V I D E O M E M O R Y : O F F
C O N T R A S T 8 0
B R I G H T 5 0
C O L O R 5 0
H U E 5 0
S H A R P 5 0
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER EXIT: MENU
RESET: RESET
B R I G H T : 5 0
C O L O R : 5 0
H U E : 5 0
S H A R P : 5 0
V I D E O
D . P I C T U R E : O F F
C O L O R S Y S : A U T O
S E T U P : 0
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER EXIT: MENU
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO. SEL: SET: ENTER EXIT: MENU
V I D E O M E M O R Y : O F F
1
C O N T R A S T 2
B R I G H T 3
C O L O R 4
H U E 5
S H A R P
The PIC CTRL (Picture Control) Menu