Siemens MC60 - Manual (Page 65)

©
Sieme
ns
AG
2003, L:\MC6
0_Maguro\en\fug\_
von_
itl\M
C60_fug_EN_03
1009\MC
60_fug_EN
_0310
09_FM\MC60
_Se
tup.fm
left page (64) of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:59)
Setup 64
VAR Langua
ge: English; VA
R issue
da
te
: 1
6-Juli-
2003
Keys
§Menu§
¢
m
¢
Keys
¢
Select function.
Any to answer
Incoming calls can be accepted by
pressing any key
(except for
B
).
Auto key lock
If activated, the keypad is locked
automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Key tones
You can set the type of acoustic key
tone:
Click or Tone or Silent
Phone setup
§Menu§
¢
m
¢
Phone setup
¢
Select function.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it (see
also p. 20).
Hide ID b
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service providers).
To suppress this display, you can
enable the "Hide ID" mode for all
subsequent calls or just for the next
call. You may need to register
separately with your service provider
for these functions.
Divert
You can specify when calls should
be diverted to your mailbox or other
numbers.
Additional information
The keypad can also be directly locked and
unlocked in idle state.
In each case:
#
Hold down.