Siemens MC60 - Manual (Page 71)

©
Sieme
ns
AG
2003, L:\MC6
0_Maguro\en\fug\_
von_
itl\M
C60_fug_EN_03
1009\MC
60_fug_EN
_0310
09_FM\MC60
_Se
tup.fm
left page (70) of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:59)
Setup 70
VAR Langua
ge: English; VA
R issue
da
te
: 1
6-Juli-
2003
§Save§ Save settings.
§Menu§
¢
m
¢
Connectivity
¢
Select function.
HTTP profile
I
Select profile.
Fax/data mod.
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be
enabled by the service provider.
There are variations in fax and data
reception, depending on the
network. Please ask your service
provider about this.
§Change§ Set the required mode.
Send vce/fax
b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up,
the following function is available
for two seconds:
§Voice/fx§ Switch to Send vce/fax
mode; you may now send
a fax.
Voice/fax rec
(Only if no special fax or data number
is available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connection).
End transmission
End transmission with PC software
and/or press
B
.
Rec fax/data
b
Your service provider has given you
a number for telephoning and a fax/
data number.
The call is signalled by a special
ringtone and the type of call (fax or
data) is displayed.
Now start the communication
program in your PC to receive the
fax/data.
APN: Enter service provider
address.
Login name: Enter login name.
Password: Enter password (shown
as a series of asterisks).
DNS1 /
DNS 2:
(optional).