Siemens MC60 - Manual (Page 66)

right page (65) of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:59)
©
Siem
ens AG
2003, L
:\MC
60_Maguro
\en\fug\_von_itl\M
C60_f
ug_EN_0
31009\MC
60_fug_EN_03
1009_FM\MC
60_Setup.fm
65 Setup
VAR Langua
ge: English; VA
R issue
da
te
: 1
6-Juli-
2003
Set up call divert (example):
The most common condition for call
divert is, for example:
Unanswered
b
I
Select Unanswered .
(Includes the conditions
Not reachable , No reply ,
Busy , see below)
§Select§ Press.
Set Select.
J
Enter the phone number
to which the caller will be
diverted (If not already
entered)
Or
·
Select this phone number
from the Phonebook or
via §Mailbox§ .
§OK§ Confirm. After a short
pause, the setting is
confirmed by the network.
All calls
b
All calls are diverted.
n
Symbol in the top line of
the display in standby
mode.
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting is activated (p. 64), you
will hear the call waiting tone during
a call.
Receiving fax
b
Fax calls are diverted to a number
with a fax connection.
Receiving data
b
Data calls are diverted to a phone
number with a PC connection.
Status check
You can check the current divert
status for all conditions.
After a short pause, the current
situation is transmitted by the
network and displayed.
p
Condition set.
o
Not set.
s
Display if status is
unknown (e.g. with
a new SIM card).