Siemens MC60 - Manual (Page 74)

right page (73) of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:59)
©
Siem
ens AG
2003, L
:\MC
60_Maguro
\en\fug\_von_itl\M
C60_f
ug_EN_0
31009\MC
60_fug_EN_03
1009_FM\MC
60_Setup.fm
73 Setup
VAR Langua
ge: English; VA
R issue
da
te
: 1
6-Juli-
2003
Network
§Menu§
¢
m
¢
Network
¢
Select function
Line b
This function is only displayed if it is
supported by the service provider.
Two separate phone numbers must be
registered on the phone.
Select line
Select the currently used phone
number.
‘
Display current phone
number.
Protected
(Phone-code protected)
You may limit usage to one phone
number.
Network info
The list of GSM networks currently
available is displayed.
²
Indicates forbidden
service providers
(depending on SIM card).
Choose network
Network search is restarted. This is
useful if you are not on your home
network or want to register on a
different network. The network list is
rebuilt when Auto network is set.
Auto network
Activate/deactivate, see Choose
network above. If "Automatic
network" is activated, the next
network on the list is dialled in
ranking order of your "preferred
networks". Alternatively select a
different network manually from the
list of the available GSM networks.
Pref. network
Enter your preferred service providers
here for when you leave your home
network (e.g. if there are differences
in price).
Additional information
Special settings may be made for each
phone number (e.g., ring tones, call divert
etc.) To do this, first switch to the required
phone number. Change phone number/
connection in standby mode:
0
Press.
§Line 1§ Press.