Siemens MC60 - Manual (Page 72)

right page (71) of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:59)
©
Siem
ens AG
2003, L
:\MC
60_Maguro
\en\fug\_von_itl\M
C60_f
ug_EN_0
31009\MC
60_fug_EN_03
1009_FM\MC
60_Setup.fm
71 Setup
VAR Langua
ge: English; VA
R issue
da
te
: 1
6-Juli-
2003
Security
§Menu§
¢
m
¢
Security
¢
Select function
The phone and SIM card are protected
against misuse by several security
codes.
Codes
PIN control , Change PIN , Change PIN2 ,
Chg.phonecode , (p. 14).
Babysitter
(Phone-code protected)
Only one phone number can be
dialled. To do this hold down the right
control key (p. 22).
Only
‚
b
(PIN2 protected)
Dialling options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialling.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
Last 10 only b
(Phone-code protected)
Only phone numbers from the call
list of "dialled numbers" (p. 33) can
be dialled. This list can be filled with
phone numbers specifically for this
purpose.
First delete the call list, then create
"new entries" by dialling phone
numbers and cancelling before the
connection is established.
This SIM only b
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a
different SIM card, enter the phone
code when requested.