Sony PCS-1/1P - Manual (Page 101)

101
About a “Memory Stick”
C
hap
te
r 4:
Vi
de
oco
n
fe
re
n
c
e W
ith
O
p
tio
nal
Equ
ipm
en
t
Before using a “Memory Stick”
• When you set the “Memory Stick” write-
protect tab to “LOCK,” data cannot be
recorded, edited, or erased.
• Use a sharp object, such as a ballpoint pen,
to move the “Memory Stick Duo” erasure
prevention switch.
• Data may be damaged if:
– You remove the “Memory Stick” or turn
off the unit while it is reading or
writing data.
– You use the “Memory Stick” in a
location subject to the effects of static
electricity or electric noise.
• Do not attach any other material than the
supplied label onto the label space.
• Attach the label so that it does not stick out
beyond the labeling position.
• Do not write forcefully on the “Memory
Stick Duo” memo area.
• Carry and store the “Memory Stick” in its
case.
• Prevent metallic objects or your finger from
coming into contact with the metal parts of
the connecting section.
• Do not strike, bend, or drop the “Memory
Stick.”
• Do not disassemble or modify the “Memory
Stick.”
• Do not allow the “Memory Stick” to get wet.
• Do not use or store the “Memory Stick” in a
location that is:
– extremely hot, such as in a car parked in
the sun.
– under direct sunlight.
– very humid or subject to corrosive
substances.
.....................................................................
• “Memory Stick Duo” and
are trademarks of Sony
Corporation.
• “Memory Stick” and are trademarks of
Sony Corporation.
• “MagicGate Memory Stick” and
are trademarks of Sony
Corporation.
• “Memory Stick-ROM” and
are trademarks of Sony
Corporation.
• “Memory Stick PRO” and
are trademarks of Sony
Corporation.
• “Memory Stick R” and are
trademarks of Sony Corporation.
• A “Memory Stick” formatted with a
computer cannot be guaranteed on the
Communication Terminal. Make sure to use
a “Memory Stick” that has been formatted
with the Communication Terminal.
• If you format a “Memory Stick”, all data,
including the still images and Phone Book,
will be lost.
To format a “Memory Stick”
Select “Memory Stick Format” from the
General Setup menu. The message “Format
a Memory Stick?” appears. When you select
“OK”, the “Memory Stick” will be
formatted.
If a “Memory Stick” that is not
formatted is inserted
The message “Format a Memory Stick?”
appears. To format it, select “OK”. If you do
not want to format it, select “Cancel”.
Notes
Terminal
Write-protect tab
Labeling position
Formatting a “Memory Stick”
Notes