Sony PCS-1/1P - Manual (Page 24)

24
Preparing the System
If you use a Sony TV, insert the IR repeater under the remote sensor of the TV.
Once you set the IR repeater, the TV will turn on or go to standby together with
the Communication Terminal when you press the
" / 1 button on the supplied
Remote Commander.
If the TV monitor is not turned on by pressing the @ / 1 button on the Remote
Commander, change the “IR Repeater Mode” setting in the General Setup menu.
For details on the “IR Repeater Mode” setting, see “General Setup Menu” on
page 49.
Turning On/Off the TV Monitor Together With the Communication
Terminal
Note
DC 19.5V
CAMERA UNIT MIC
(PLUG IN POWER) ISDN UNIT WHITE
BOARD
DSB
IR OUT
100BASE-TX
10BASE-T
1 2
1 2
to IR OUT
IR repeater (supplied)
Remote sensor
TV monitor