Samsung Digimax 420 - Manual (Page 25)

25
RECORDING
Starting recording mode
INFORMATION
Depending on the shooting conditions, the available recording time may be changed.
If the memory card is inserted in the camera, all the camera functions apply only to
the memory card.
If the memory card is not inserted in the camera, all the camera functions apply only
to the internal memory.
1. Insert the batteries (p.18). Insert the batteries taking note of the polarity (+ / -).
2. Insert the memory card (p.22). As this camera has a 16MB internal memory, you do not need to
insert the memory card. If the memory card is not inserted, an image will be stored in the internal
memory. To expand memory capacity, insert a memory card. If the memory card is inserted, an
image will be stored on the memory card.
3. Close the memory card cover.
4. Slide the power switch to turn on the camera.
If the date/time that is displayed on the LCD monitor is incorrect, reset the date/time before taking a
picture. (p.72)
5. Select the MOVIE CLIP( ) mode by rotating the mode dial.
6. Point the camera towards the subject and compose the shot by
using the viewfinder or LCD monitor.
7. Press the shutter button and movie clips are recorded for as long
as the available recording time of the memory permits.
Movie clips will still be recorded if the shutter button is
released.
If you wish to stop recording, press the shutter button again.
Image size and type are listed below.
- Image size : 288 x 208
- File type
:*.AVI
Recording a Movie clip
Movie clip mode