Samsung Digimax 420 - Manual (Page 49)

PLA
Y
49
Starting the play mode
If the memory card is inserted in the camera, all the camera functions apply only to
the memory card.
If the memory card is not inserted in the camera, all the camera functions apply only
to the internal memory.
Turn the camera on and select the PLAY( ) mode by rotating the MODE dial.
The camera can now play back the images stored on a memory.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
1. Slide the power switch to
turn on the camera.
2. Select the PLAY( ) mode by
rotating the mode dial.
Playing back a movie clip
3. The last image stored on the
memory is displayed on the LCD
monitor.
4. Select the movie clip that you want
to play back by using the
LEFT( )/RIGHT( ) button.
Keep the LEFT/ RIGHT button pressing and the images are shown rapidly.
If you select a movie clip file, the movie clip indicator( ) will be displayed on the LCD monitor.
Press the PLAY & PAUSE button to play back a movie clip. To pause it while playing back a movie clip,
press the PLAY & PAUSE button again. To stop play back, press the LEFT / RIGHT button.