Samsung Digimax 420 - Manual (Page 46)

46
You can select the camera s sensitivity to light by selecting the ISO sub menu.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
In the STILL IMAGE mode, you can select the ISO value.
The higher the number, the more sensitive it is to light. As with film, the higher
speeds usually induce more electronic noise so the image gets grainier.
ISO
1. Rotate the mode dial to the STILL IMAGE mode and press
the MENU button.
2. Select the [STILL IMAGE 2/2] menu by pressing the RIGHT
button.
3. Select the [ISO] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [ISO]
sub menu.
5. Select the desired sub menu by pressing the UP/DOWN
button.
AUTO : The camera's sensitivity is automatically
changed by variables such as lighting
value or subject brightness.
100/ 200/ 400 : In the same lighting conditions, the higher
the ISO value is, the faster the shutter
speed will be. However, the images can
be saturated in very bright conditions.
6. Press the OK button to confirm the setting.
7. Press the menu button and the menu display will disappear.
Take a picture.
BACK: SET:OK
STILL IMAGE 2/2
AUTO
100
200
400
STILL IMAGE mode
EXIT:MENU CHANGE:
STILL IMAGE 2/2
EXPOSURE +0.0 EV
ISO AUTO
W.BALANCE AUTO
SCENE NORMAL
STILL IMAGE mode