Samsung Digimax 420 - Manual (Page 59)

59
PLA
Y
Slide show
Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Rotate the mode dial to the PLAY mode and press the MENU
button.
2. Select the [SLIDE SHOW] menu by pressing the UP/DOWN
button.
3. Press the RIGHT button and the cursor will shift to the [SLIDE
SHOW] sub menu.
4. Select the desired sub menu by pressing the UP/DOWN
button.
5. Press the OK button. The menu display will disappear and the
slide show will start.
To pause the slide show, press the play & pause button.
To resume the slide show, press the play & pause button
again.
Press the LEFT / RIGHT button and the slide show will stop.
INFORMATION
The default is 3 SEC and the loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor.
The [POWER OFF] function can t be activated.
When the last stored image is played back, the first stored image will be played back
automatically.
While the slide show is playing, only the first frame of an AVI file is displayed.
If there is only an image in the memory card, the slide show will not start.
BACK: SET:OK
PLAY 1/2
SLIDE SHOW
03 SEC
EXIT:MENU CHANGE:
PLAY 1/2
SLIDE SHOW 03 SEC
PROTECT
DELETE ALL
COPY TO CARD