Samsung Digimax 420 - Manual (Page 41)

41
RECORDING
1. Rotate the mode dial to the STILL IMAGE mode and press
the MENU button.
2. Select the [QUALITY] menu by pressing the UP/DOWN
button.
3. Press the RIGHT button and the cursor will shift to the
[QUALITY] sub menu.
4. Select the desired sub menu by pressing the UP/DOWN
button.
5. Press the OK button to confirm the setting.
6. Press the menu button and the menu display will disappear.
Take a picture.
Quality
In STILL IMAGE mode, you can select the image quality (Data compression rate).
INFORMATION
The higher the QUALITY setting, the better the final image will be. However, the high quality
setting will require more memory and therefore reduce the number of images you can store
on the memory.
SUPER FINE is the highest quality and NORMAL is the lowest setting. Choose the setting
appropriate for your needs.
The image file is stored in *.jpg.
This file format complies with the DCF(Design rule for Camera File system).
Even if the camera should be restarted, the quality setting is maintained.
When using the 16MB internal memory, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance)
Digimax 420
Quality Size
Super fine 6 7 28 109
Fine 13 15 56 199
Normal 20 23 84 299
BACK: SET:OK
STILL IMAGE 1/2
SUPER FINE
QUALITY
FINE
NORMAL
EXIT:MENU CHANGE:
STILL IMAGE 1/2
SIZE
QUALITY
EFFECT NORMAL
SHOOTING