Samsung Digimax 420 - Manual (Page 52)

52
When you press the MENU button, the PLAY mode menu will be displayed on the LCD monitor.
Pressing it again will return the LCD to the initial display.
The menu will not display on the LCD monitor under the following circumstances:
- When another button is being pressed.
- While image data is being processed. (While the green LED next to the viewfinder is blinking)
- When there is no battery capacity.
LCD( ) button
The shooting information will be displayed on the LCD monitor.
The last image stored in the memory is displayed on the LCD monitor.
Pressing the LCD button in the PLAY( ) mode will change the display as shown below.
[Image & Icons]
[Image & Information] [Image only]
Pressing the
LCD button
Pressing the
LCD button
Pressing the
LCD button
Menu button
Menu off
Pressing the
menu button
PAGE:
PLAY 1/2
SLIDE SHOW 03 SEC
PROTECT
DELETE ALL
COPY TO CARD
Menu on