Using budget codes, When rental or ink ribbon is selected, When rental is selected – Sony UP-CR20L User Manual

Page 39: When the price setting is configured

Advertising
background image

39

Using Budget Codes

Cha

p

te

r 4

A

d

v

a

nc
ed Se

tt

ing
s

When Rental or Ink Ribbon is selected

When you select Rental or Ink Ribbon, Order and Price
configurations are also enabled simultaneously. Configure
Order and Price settings before selecting Rental or Ink
Ribbon when using either of these modes.
If you reconfigure Order and Price settings after selecting
the Rental or Ink Ribbon mode, be sure to touch the Rental
and Ink Ribbon buttons again to reselect them.
As you touch the

button and other tabs while

navigating the administration screen, check to make sure
that the

and

buttons are still selected.

When Rental is selected

If Rental is selected, the remaining number of prints
available is displayed. When this number reaches “0,” no
more prints can be made until the setting for the maximum
number of prints is reset.
To reset the maximum number of prints, touch the

button and input the new maximum.

When the Price setting is configured

The maximum price includes the basic price and additional
fees. The maximum price setting also assumes that matte
finish is always selected. (This is because matte finish can
be selected during order confirmation.)

Using Budget Codes

When direct payment for photos is not required, such as
when using the unit for in-house purposes, budget codes
can be used to keep track of printing costs incurred by each
department/project.
In this case, the budget code is entered instead of a
password.
Budget codes are four-digit numbers that are assigned
beforehand to individual departments or projects.
When a budget code is used, the cost is tracked according
to the code that is input.

Budget code entry screen example

Settings for using budget codes

1

Open the Administration tab on the administration
screen.

2

Touch the [ON] button for [Budget Code].

You can confirm the number of photos printed for each
budget code by opening and exporting the print log
from the Administration tab of the administration
screen. For details, see “Displaying the Print Log” on
page 54
.

Advertising