Sony UP-CR20L - Manual (Page 50)

50
Cleaning
Chapt
er 5 Maint
e
n
anc
e
Chapter
5
Maintenance
Cleaning
Cleaning the Interior
If defects such as white stripes and speckled scratches
begin to appear in printouts, you may need to clean the
thermal head and rollers.
You can check whether cleaning is necessary in the
confirmation screen for the remaining ink ribbon. To
display the confirmation screen for the remaining ink
ribbon, touch the top right corner of the Start Guide screen
twice in succession.
When the total number of prints exceeds a fixed value, a
message indicating that cleaning is necessary appears. If
this occurs, touch the
button to begin cleaning.
The following items are necessary to perform interior
cleaning.
• The cleaning ribbon supplied with the printer
• The cleaning sheet (Cleaning Sheet 200) supplied with
the printing pack
• Print paper
• The cleaning ribbon is reusable. Do not throw it away.
• As the cleaning sheet in not reusable, discard it after the
first use.
• If there is insufficient print paper remaining, an error
may occur. If this occurs, replace the print paper and
begin the cleaning process again.
1
Touch the button.
2
Remove the output cover, output tray, and scrap
receptacle.
3
Check the remaining amount of print paper.
White stripes
Speckled
scratch
Notes
Number of prints