Sony UP-CR20L - Manual (Page 77)

77
Memory Cards
App
end
ix
xD-Picture Card
The card can only be set in the slot in one direction. If the
card does not slide into the slot smoothly, do not try to
force it in. Instead, make sure that the card is oriented
correctly, with the v mark pointing towards the slot.
For details, refer to the user’s manual accompanying your
card.
Notes on using memory cards
The following apply to all memory cards except “Memory
Stick.”
For details about ““Memory Stick” types” on page 75.
• Before using any memory card, be sure to carefully read
its user manual.
• When you purchase a memory card, you must first
initialize it with a digital camera. If you initialize the
memory card with a personal computer or any device
other than a digital camera, this unit may not be able to
read the image data stored on the memory card.
• Do not attempt to use any memory card that is not
specified for use with this unit. Doing so could damage
this unit.
• Do not strike, bend, or drop the memory card.
• Do not attempt to disassemble or modify the memory
card.
• Do not get the memory card wet.
• Because the memory card is vulnerable to humidity, we
recommend that such memory card not be used under
humid conditions.
• Avoid storing or using memory card under the following
conditions:
– In a hot location, such as inside a car or outside on a
very hot day.
– In direct sunlight.
– In a humid location or where corrosion occurs easily.
– In a location where the memory card could be exposed
to electrostatic discharge or electronic noise.
• Do not touch the contacts on a CompactFlash card, SD
Card, or MultiMediaCard with your hands or bare metal.
• Always keep the memory card in its case when carrying
or storing it.
• When using an SD Card or MultiMediaCard, insert the
memory card directly into the corresponding slot. Do not
insert these memory cards into the CompactFlash type
adapter. Doing so could cause the image data stored in
the card to be deleted or damaged.
• Always make sure that the memory card is oriented
correctly before inserting it in the appropriate slot of the
unit. Inserting any memory card in the wrong direction
may damage the unit and/or memory card and cause
malfunctions.
• Do not remove the memory card or turn off the unit
while data is being read or written to the memory card.
Doing so could cause the data that is being recorded to
be deleted or damaged.
Notes on USB Memory
Before inserting a USB memory device into the slot, make
sure that the top and bottom of the connectors correspond.
For details, refer to the instructions provided with your
USB memory device.
• This unit does not support USB memory devices with
multiple drives or USB memory devices with security
functions.
• Compatibility is not guaranteed for all USB memory
devices.
Notes on CDs and DVDs
This unit can read the following file system formats.
• UDF
• ISO9660
• Joliet
Readability has been tested for discs created with
Microsoft Windows XP and Windows Vista (UDF version
2.01).
However, this does not guarantee readability for all writing
applications used to create discs.
Handling CDs and DVDs
• Handle discs only by the edges. Never touch the
recording surface.
• Do not write on discs or paste labels on them.
• Do not store discs in dusty or humid locations, in direct
sunlight, or near heat-generating devices.
• Avoid spilling liquids on discs.
Note
Direction of insertion
v mark
Notes
Direction of
insertion