Samsung ML-1200 - Manual (Page 11)

S ETTING U P Y OUR P RINTER 2.5 S ETTING U P Y OUR P RINTER 2.4
1
Pull the paper support on the automatic
input tray up, until it stops.
5
Adjust the paper guides to the width of
the paper stack.
2 Before loading the paper, flex the sheets
back and forth to loosen them, then fan
them.
Tap the edges of the stack on a table top
to straighten them to prevent paper jams.
3 Load a stack of paper into the automatic
input tray with the print side facing
up.
4
Do not load too much. This tray
holds up to 150 sheets.
Keep the paper below this height
mark.
Loading Paper
Load Paper
Notes:
• Do not push the width guide far enough to cause the media to warp.
• If you do not adjust the width guide, it may cause paper jam.
• If you are needed to add more sheets of paper while printing, remove the
remaining paper from the tray at first. Then, reinsert them with the new
paper. Note that adding new paper into the remains in the tray may cause
paper jams or multiple feeding.