Samsung ML-1200 - Manual (Page 29)

P RINTING T ASKS 5.7 P RINTING T ASKS 5.6
You can select the number of pages to print on a single sheet
of paper. To print more than one page per sheet, the pages
will appear decreased in size and arranged on the sheet. You
can print up to 16 pages on one sheet.
1 To change the print settings from your software application,
access the printer properties. See page
5.1 to access the
printer properties.
From the Paper tab, select the paper orientation, source,
size and type.
2 Click the Output tab, and choose Multiple Pages per
Side in the Type drop-down list. Then select the number of
pages you want to print per sheet (1, 2, 4, 9 or 16) in the
Pages per Sheet drop-down list.
3 Click Print Page Borders to print a border around each
page on the sheet. Print Page Borders is enabled only if
the Pages per Sheet is 2, 4, 9, or 16.
➐☎ ➐☎
4 pages per sheet
➐☎ ➐☎ 9 pages per sheet
P rinting Multiple Pages on
One Sheet of Paper
(N-Up Printing)
4 Click OK to start printing.
Using Toner Save Mode
Toner Save mode allows the printer to use less toner on
each page. Selecting this option will extend the life of your
toner cartridge and reduce your cost per page without a
significant reduction in print quality.
There are two ways to enable the Toner Save mode:
To enable this feature from your printer
Press the Toner Save button on the control panel. The printer
must be in Ready mode (Data light is on).
• If the button backlight is on, toner save mode activates and
the printer uses less toner to print a page.
• If the button backlight is off, toner save mode is disabled
and the printer prints in a normal mode.
Note: To enable or disable the Toner Save mode from the
control panel, the Toner Save Mode option in the printer driver
must be set to Printer Setting. See below.
To enable this feature from the software application
1 To change the print settings from your software application,
access the printer properties. See page
5.1 to access the
printer properties.
2 Click the Graphic tab, and select the Toner Save Mode
option. You have the following options:
• Printer Setting: If you select this option, this feature is
determined by the setting you’ve made on the control
panel of the printer.
• Standard: If you don’t need to save toner to print a
document, select this option.
• Save: Select this option to allow the printer to use less
toner on each page.
3 Click OK.