Samsung ML-1200 - Manual (Page 22)

P RINT M EDIA 4.7 P RINT M EDIA 4.6
Loading Paper
4
Print the document.
3
When you print a document, you must
select Manual for Paper Source from
the software application, and then select
the correct paper size and type. For
details, see page
5.3 .
5 If you are printing multiple pages, load
the next sheet after the first page prints
out.
6
Press Demo to start feeding.
Notes:
• The face-up output slot may not hold the printed pages properly.
• The printed pages will not stack in the face-down output tray unless you change output lever
position. After you finish using the face-up output slot, you must change the position of the
output lever to the normal position by pushing it up.
2 Push the output lever down to open the
face-up output slot.
Printing on Envelopes
Guidelines
• Only use envelopes recommended for laser printers. Before you load envelopes in the
input tray, make sure that they are undamaged and are not stuck together.
• Do not feed stamped envelopes.
• Never use envelopes with clasps, snaps, windows, coated lining, or self-stick adhesives
as these envelopes may severely damage the printer.
2 Load the envelopes into the input tray
with the flap side down.
The stamp area is on the right side
and the end of the envelope with the
stamp area enters the tray first.
1 Flex or fan the envelopes before
loading.
3
Adjust the guide to the edge of the
envelope stack.