Samsung ML-1200 - Manual (Page 32)

P RINTING T ASKS 5.13 P RINTING T ASKS 5.12
Printing Watermarks
The Watermark option allows you to print text over an existing
document. For example, you may want to have large gray
letters reading “Draft” or “Confidential” printed diagonally
across the first page or all pages of a document.
There are several predefined watermarks in the ML-1200
Series printer, these can be modified or you can add new ones
to the list.
1 To change the print settings from your software application,
access the printer properties. See page
5.1
to access the printer properties.
2 Click the Watermark tab and select the desired watermark
in the Message drop-down list. You will see
the selected watermark in the preview window.
3 Click OK to start printing.
To use an existing
watermark
preview window
Setting Graphic Properties
Use this option to lighten or darken the image appearance of
your print jobs.
• Normal – For normal documents.
• Light – For bolder line widths or darker gray-scale images.
• Dark – For finer line width, higher definition in graphics, and
lighter gray-scale images.
Darkness
With this option On, the printer stores the image for a printed
page until the printer signals that the page has successfully
exited the printer. If a paper jam occurs, the printer will
automatically reprint all jammed pages after the jam is
cleared. Reprint When Jam
You can set the printer to reprint the last page of the last job
when the Cancel/Reprint button is pressed. For details, see
‘Reprinting the Last Page’ on page
5.20 .
Reprint
With this option checked, you can optimize the print quality for
a low pressure area, such as a high ground. Altitude Correction
To conserve power when the printer is idle, set the printer to
enter a reduced power state after completing a print job,
according to a time specified in the Power save Mode box.
Select the desired length of time from the drop-down list.
If your printer is constantly in use, select OFF to keep the
printer ready with the minimum warm-up time. This uses more
energy to keep the printer ready to print.
Power Save Mode