Siemens SXG75 - Manual (Page 101)

Extras 100
© Siemens AG 20
03, C:
\Siemens\
D
TP
-Sa
tz\P
rod
ukte\
SX
G
75_
Wolf
_5_1
\out-
left page (100) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13)
Te
mplate: X75, V
ersion
2.
2;VAR
La
ngu
age: en; VAR
issue d
ate
: 050
902
Alarm clock
C
¢
S
¢
Alarm clock
The alarm clock can be set for each
day of the week separately.
Set alarm
I
Select day of the week.
§Options§
Open menu and select Set
alarm .
J
Set time (hh:mm).
§Options§
Open menu and select
Save . The saved alarm is
activated automatically.
Apply every day
§Options§ Open menu and select
Apply every day .
Options alarm clock
§Options§ Open menu.
End alarm
The alarm will ring at the set time,
even when the ringtone or the
phone is switched off.
§Snooze§ Stop the alarm tone, and
reset it for 10 minutes.
The original time of the alarm is not
changed. If the phone was off when
the alarm rang, it will turn off again,
but power itself up after 10 minutes
for the next alarm.
Or
§Off§ End alarm.
The alarm remains active and will
occur at the same time in one week.
FM radio
C
¢
S
¢
FM radio
To use the radio function, the stereo
headset must be connected to the
phone.
If no stereo headset is connected
when the radio is started or while
the radio is active, a message to this
effect is displayed. Connect headset
or press §OK§ to return to the main
menu.
Additional information
The alarm will ring with the set melody and
volume, page 112.
Set alarm Edit currently highlighted
alarm and save it (see above).
Turn on /
Turn off
If alarm is off, turn is on and
vice versa.
Apply
every day
Use the time of the highlighted
alarm for every day of the
week.
For standard functions see page 20.
Additional information
¹ Display in standby mode:
alarm clock is turned on.