Siemens SXG75 - Manual (Page 123)

Settings 122
© Siemens AG 20
03, C:
\Siemens\
D
TP
-Sa
tz\P
rod
ukte\
SX
G
75_
Wolf
_5_1
\out-
left page (122) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13)
Te
mplate: X75, V
ersion
2.
2;VAR
La
ngu
age: en; VAR
issue d
ate
: 050
902
Divert other call types
All calls / Data / Fax / Messages
Select a call type and con-
firm with
C
.
§Options§ Open menu and select
Set .
J Enter the number you
want to divert to. Or se-
lect Contacts from the op-
tions menu and select a
contact.
Check status
b
§Options§ Open menu and select
Check status .
You can check the current divert
status for all conditions. After a
short pause, the current situation is
transmitted by the network and
displayed.
Clear all
b
§Options§ Open menu and select
Clear all .
All set diversions are cleared.
Confirm with
C
.
All calls
b
All calls are diverted.
Ç Symbol in the top line of
the display in standby
mode.
Unanswered
b
A call is diverted in the following sit-
uations: Not reachable , No reply , Busy
(see below).
Not reachable
b
A call is diverted if the phone is
switched off or is out of range.
No reply
b
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
b
A call is diverted if another call is in
progress. If you activated Call waiting
(page 121), you will hear the call
waiting tone during a call (page 33).
Fax
b
Fax calls are diverted to a number
with a fax connection.
Data/Messages
b
Data calls are diverted to a number
with a PC connection.
Additional information
Note that the divert is stored in the network
and not in the phone (e.g., when the
SIM card is changed).
Reactivate divert
The last divert has been stored. Proceed
as with "Set divert". The stored number is
displayed. Confirm number.