Siemens SXG75 - Manual (Page 131)

Settings 130
© Siemens AG 20
03, C:
\Siemens\
D
TP
-Sa
tz\P
rod
ukte\
SX
G
75_
Wolf
_5_1
\out-
left page (130) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13)
Te
mplate: X75, V
ersion
2.
2;VAR
La
ngu
age: en; VAR
issue d
ate
: 050
902
Settings
Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
If activated, the keypad is locked au-
tomatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
On / Off Activate/deactivate and
confirm with
C
.
Only b
(PIN2 or phone-code protected)
Dialling options are restricted to the
SIM protected numbers in the con-
tacts. If only area codes are entered,
relevant numbers can be added to
these manually before dialling.
If the SIM card does not support PIN2
input, all the contacts can be protect-
ed with the phone code.
On / Off Activate/deactivate and
confirm with
C
.
PIN codes
Description on page 24:
PIN control, Change PIN, Change PIN2,
Change phonecde
This SIM only b
(PIN2 or phone-code protected)
The phone can be linked to a SIM
card when the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a
different SIM card, enter the phone
code when requested.
On / Off Activate/deactivate and
confirm with
C
.
Barrings b
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4-digit net-
work password for network barring.
Your service provider will supply you
with this password. You may need to
register separately for each barring.
Activate/deactivate Barrings
C
Confirm warning
message.
I
Select call type described
below and confirm
with
C
.
Additional information
The keypad can also be directly locked and
unlocked in standby mode. In each case:
#
Press and hold.