Siemens 463V FA - Manual (Page 12)

Colour monitor 463V FA
10 - English A26361-K864-Z100-1-5E19
Switching the monitor on/off
1 2 3
1 = Buttons for the OSD menu
(On-Screen-Display)
2 = Power indicator
3 = Power button
The ON/OFF switch (3) is used for switching the monitor on and off.
The power indicator (2) glows green when the monitor and computer are switched on. The power
indicator glows orange when the monitor does not receive a video signal or is in the energy-saving
mode. The power indicator goes off when the monitor is switched off.
When you switch the computer system on, you must proceed in the following order:
Ê First switch the LCD monitor on with the ON/OFF switch (3).
Ê Then switch on the computer.
i
If your computer has a power management function (energy-saving mode), you should
read the "Notes on power management" section in this chapter.
Notes on power management
If your computer is equipped with power management, the monitor can support this function fully.
Here the monitor does not distinguish between the individual energy-saving modes of the computer
(standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the
mode with the highest energy-saving effect.
Stage ON Energy-saving mode
Power indicator lights green glows orange
Function Monitor
operating
normally
Monitor
is dark
Power consumption normal
< 60 W
reduced to < 3 W