Siemens 463V FA - Manual (Page 17)

Colour monitor 463V FA
A26361-K864-Z100-1-5E19 English - 15
Setting colour temperature and colours
Calling the Color Adjust setting window
Selecting colour temperature ( Color Temperature )
The "warmth" of the screen colours is set using the colour temperature.
The colour temperature is measured in K (= Kelvin). You can select from
9300 K, 6500 K, 5400 K, 5000 K and
Native .
Native = original colour of the LCD display
Setting user-defined colours ( User Color )
In the user-defined setting you can change the colour ratios of the basic
colours (red, green, blue) as required.
Adjusting the intensity of the grey levels (Gamma correction) ( Gamma )
This function allows you to optimise the display of multimedia
applications.
Linear = default setting
Emphasize Brighter Level = Bright areas remain bright, dark areas become
darker
Emphasize Darker Level = Dark areas remain dark, bright areas become
brighter
Setting functions in the "Advanced Menu" menu
Calling the Advanced Menu setting window
Setting scaling ( Scaling )
1:1 = full picture size (depending on the resolution)
Fill All = switch on the full-screen mode. The display area is stretched to
the full picture size (1,280 pixels, side ratio 5:4). As a result, the display
may appear distorted.
Fill Aspect Ratio = Switch on the proportional full-screen mode: The
display area is expanded to the maximum picture size while maintaining
the side ratio (either full picture width or full picture height).
Adjusting the picture quality in case of interpolation ( Sharpness )
This function allows you to set the sharpness of the interpolation filter.
Thus the display can be optimised for pictures or texts.
Displaying the monitor information ( Information )
This function allows you to display e.g. the current resolution and refresh
rate.