Siemens 463V FA User Manual
Page 18
Colour monitor 463V FA
16 - English
A26361-K864-Z100-1-5E19
Setting functions in the "Setup Menu"
menu
Calling the
Setup Menu
setting window
Selecting input signal (
Input Select
)
The monitor can be operated with analogue or digital signals. With this
function you can (depending on the graphics card you use) switch over
between the analogue and the digital mode.
Setting the language for the OSD menu (
Language Select
)
You can choose from English (default setting), German, French, Italian
and Spanish.
Displaying note on resolution (
Resolution Notice
)
The optimum resolution for this monitor is 1280 x 1024. With the function
activated (
ON
), a message appears on the screen after approx.
30 seconds if a different resolution has been selected.
Setting position for the OSD menu (
OSD Position
)
You can shift the OSD menu up, down, to the left or to the right.
Setting display time for the OSD menu (
OSD Time Out
)
You can select a value from 5 to 60 seconds. If the adjusted time has run
out without the settings being saved, the OSD menu is automatically
closed.
Mode Message ON/OFF
If this function is enabled (
ON
) a message will be displayed on the screen
after approx. 3 seconds when anther mode or another input has been
selected.
Setting background for the OSD menu (
OSD Background
)
ON
= normal setting
OFF
= transparent
Activating the factory settings
Activating the factory settings (
Memory Recall
)
The
Auto Processing
message is displayed. All settings will be reset without
questioning.