Siemens 463V FA - Manual (Page 24)

Colour monitor 463V FA
22 - English A26361-K864-Z100-1-5E19
Having this problem? Check the following points:
No display (power indicator lights) Ê Check whether the computer is switched
on.
Ê Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
Ê Press any key on the computer keyboard –
the computer may be in energy saving
mode.
Ê Alter the brightness and/or contrast until
you get a picture.
Ê Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
Ê Check whether the computer is switched
on.
The input signal (horizontal frequency and
refresh rate) at the displayed input does not
correspond to the technical monitor data.
Ê Adjust the video frequency range using the
computer software (see documentation for
your computer or your graphics card).
Picture position is not correct The monitor recognises an undefined mode (see
"Technical data").
Ê Press the AUTO \ AUTO button to perform
the auto-adjustment of the screen.
Ê Set the picture position with the OSD menu
(see "Operation of the monitor").
Picture is shaking Ê Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.