Siemens 463V FA - Manual (Page 15)

Colour monitor 463V FA
A26361-K864-Z100-1-5E19 English - 13
To set the OSD menu, perform the following steps:
Ê Briefly press the MENU \ AUTO button to activate the OSD menu.
The main menu appears on the screen with icons for the setting functions.
The first symbol ( Auto Image Adjust ) is
highlighted. At the bottom of the OSD menu
each button's function is displayed.
Ê Press the - or + button to highlight another
icon if necessary (e.g.
Manual Image Adjust ).
Ê Press the INPUT button to select the
highlighted icon.
The corresponding setting window (here: Manual Image Adjust ) is displayed.
The first symbol ( H. / V. Position ) is highlighted.
Ê If necessary, press the - or + button to mark
the next icon.
Ê Press the INPUT button to select the
highlighted icon.
The icon's colour changes.
Ê Press the - or + button to adjust the
selected function.
Ê Press the MENU \ AUTO button to save the
settings.
The icon's colour changes.
Ê Press the - or + button to mark another
symbol or press the MENU \ AUTO button
to return to the main menu.
All changes are stored automatically.
If you want to change other settings, select the corresponding function from the OSD main menu. All
possible adjustments of the main menu are described in the following.
i
The OSD menu for analogue monitor operation is described in the following. During digital
operation some functions are not available, as they are not required due to the digital
transmission technology used.