SUPER MICRO Computer SUPERSERVER 6015B-3 - Manual (Page 13)

1-3
Chapter 1: Introduction
must have RAID support to enable the hot-swap capability and RAID function of
the Serial ATA drives.
PCI Expansion Slots
The X7DBR-3/X7DBR-E has two Universal PCI slots, each of which support either
one x8 PCI-Express card or one PCI-X 133/100 MHz card. One standard size
expansion card and one low profi le expansion card (with their appropriate riser
cards) may be used with the server. See Section 5-6 for details.
Onboard Controllers/Ports
One fl oppy drive controller and one onboard ATA/100 controller are provided to
support up to two IDE hard drives or ATAPI devices. The color-coded I/O ports
include one COM port, a VGA (monitor) port, two USB 2.0 ports, PS/2 mouse and
keyboard ports and two gigabit Ethernet ports.
ATI Graphics Controller
The X7DBR-3/X7DBR-E features an integrated ATI video controller based on the
ES1000 graphics chip. The ES1000 was designed specifi cally for servers, featuring
low power consumption, high reliability and superior longevity.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3 Server Chassis Features
The SuperServer 6015B-3/6015B-T is a high-end, scaleable server platform built
upon the SC815TQ-560 1U server chassis. The following is a general outline of
the main features of the SC815TQ-560 chassis.
System Power
The SC815TQ-560 features a single 560W power supply. Power must be removed
from the system before servicing or replacing the power supply.