SUPER MICRO Computer SUPERSERVER 6015B-3 - Manual (Page 141)

F-1
Appendix F: System Specifi cations
Appendix F
System Specifi cations
Processors
Single or dual Intel® Xeon™ 5100/5000 Sequence processors at a front side
(system) bus speed of 1333/1066/667 MHz.
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
Intel 5000P/ESB2 chipset
BIOS
8 Mb Phoenix® Flash ROM
Memory Capacity
Eight 240-pin DIMM sockets supporting up to 32 GB of ECC FBD DDR2-667/533
SDRAM.
Note: Dual channel memory - requires memory to be installed two modules at a time. See the
memory section in Chapter 5 for details.
SAS Controller (6015B-3)
Adaptec 9410 controller for 8-port SAS (RAID 0, 1 and 10 supported)
Serial ATA Controller
Intel ESB2 on-chip controller for six-port Serial ATA (RAID 0, 1 5 and 10
supported)
SAS/SATA Drive Bays
Four (4) hot-swap drive bays to house four (4) SAS or SATA drives
Peripheral Drive Bays
One (1) slim fl oppy drive (optional)
One (1) slim DVD-ROM drive
Expansion Slots (provided with included riser cards)
Two (2) Universal 133 MHz PCI-X/PCI-Express x8 slots for one standard size
card and one low-profi le card (with the use of the included riser cards)