Sony STRDG800 - Manual (Page 11)

11 US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US03CON_STR-DG800-
CEL.fm masterpage: Right
STR-DG800
2-662-258-12 (1)
Getting Star
ted
Name Function
A AV ?/1 Press to turn on or off the
Sony audio/video components
that the remote is
programmed to operate.
To turn the TV on or off, press
TV(wk) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
B ?/1 Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
Name Function
C Input buttons Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components by changing the
code. For details see
“Programming the remote”
(page 86).
D 2ND ZONE
Press 2ND ZONE to light up
the button to select the
command mode of the remote.
E SOURCE Press to select the current
input for the main receiver.
F MOVIE,
MUSIC
Press to select sound fields
(MOVIE, MUSIC).
G AUTO CAL Press to activate the Auto
Calibration function.
H D.TUNING Press to enter direct tuning
mode.
Button Assigned Sony
component
VIDEO 1 VCR (VTR mode 3)
VIDEO 2 VCR (VTR mode 2)
VIDEO 3 VCR (VTR mode 1)
DVD DVD player
TV/SAT TV tuner
MD/TAPE MD deck
SA-CD/CD Super Audio CD/CD
player
TUNER Built-in tuner
PHONO Not assigned.
continued
US01COV_STR-DG800-CEL.book Page 11 Tuesday, March 14, 2006 3:53 PM