Sony STRDG800 - Manual (Page 80)

80 US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm masterpage: Left
STR-DG800
2-667-346-12 (1)
Watching component
images from other inputs
(COMPONENT VIDEO ASSIGN)
You can reassign a component video input to
another input.
1
Press AMP and then press
MENU.
“1-LEVEL SET” appears on the display.
2
Press control button V/v
repeatedly to select “6-VIDEO
SET”.
3
Press the control button or
control button
b to enter the
menu.
4
Press control button V/v
repeatedly to select
“COMPO V. ASSIGN”.
5
Press the control button or
control button
b to enter the
parameter.
6
Press control button V/v
repeatedly to select the
component video input you
want to reassign (for example,
DVD).
7
Press the control button or
control button
b to enter your
selection.
8
Press control button V/v
repeatedly to select the input
you want the component video
input selected in step 6 to be
reassigned to (for example,
VIDEO 1).
In this case, select “DVD–VIDEO 1”.
When you press VIDEO 1, the image
from the component connected to the
VIDEO 1 jacks will be a component
video image. The input you can reassign
to varies for each component video input.
For details, see “Assignable inputs for
digital audio input” below.
To return to the previous display
Press control button B.
Assignable inputs for digital
audio input
Notes
• You cannot reassign more than one component
video input to the same input.
• You cannot use the component video input as the
original input when it has been reassigned to
another input.
Component
video input Assignable
inputs Display
DVD VIDEO 1 DVD–VIDEO 1
VIDEO 2 DVD–VIDEO 2
VIDEO 3 DVD–VIDEO 3
DVD DVD–DVD
MD/TAPE DVD–MD/TAPE
SA-CD/CD DVD–SA-CD
TV/SAT VIDEO 1 TV/SAT–VIDEO 1
VIDEO 2 TV/SAT–VIDEO 2
VIDEO 3 TV/SAT–VIDEO 3
TV/SAT TV/SAT–TV/SAT
MD/TAPE TV/SAT–MD/
TAPE
SA-CD/CD TV/SAT–SA-CD
US01COV_STR-DG800-CEL.book Page 80 Tuesday, March 14, 2006 3:53 PM