Sony STRDG800 - Manual (Page 24)

24 US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US03CON_STR-DG800-
CEL.fm masterpage: Left
STR-DG800
2-662-258-12 (1)
Notes
• Connect image display components such as a TV
monitor or a projector to the MONITOR OUT jack
on the receiver.
• Turn on the receiver when the video and audio of a
playback component are being output to a TV
through the receiver. If the power supply of the
receiver is not on, neither video nor audio is
transmitted.
Converting video signals
This receiver is equipped with a function for
converting video signals. You can output the
video signal after connecting this receiver via
the MONITOR OUT jack as shown in the
illustration.
Video signals can be output as component
video or S-video signals, S-video signals can
be output as component video signals and this
upconverted video signals can only be output
from the MONITOR OUT jack.
Note on converting video signals
When video signals from a VCR, etc., are
converted on this receiver and then output to
your TV, depending on the status of the video
signal output, the image on the TV screen may
appear distorted horizontally or no image may
be output.
Reassigning video input signals
to another input
Component video input signals can be
reassigned to another input (page 80).
TV monitor etc., INPUT jack
HDMI
Receiver MONITOR OUT jack
Receiver INPUT jack
Video component OUTPUT jack
Signal
processing
COMPONENT
VIDEO
S-VIDEO VIDEO
HDMI
COMPONENT
VIDEO
S-VIDEO VIDEO
HDMI
COMPONENT
VIDEO
S-VIDEO VIDEO
HDMI
COMPONENT
VIDEO
S-VIDEO VIDEO
High quality image
US01COV_STR-DG800-CEL.book Page 24 Tuesday, March 14, 2006 3:53 PM