Sony STRDG800 - Manual (Page 66)

66 US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm masterpage: Left
STR-DG800
2-667-346-12 (1)
Using only the front
speakers
(2CH STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the sub woofer.
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
Press 2CH.
Note
No sound is output from the sub woofer in the 2CH
STEREO mode. To listen to 2 channel stereo sources
using the front left/right speakers and a sub woofer,
select “A.F.D. AUTO” (page 62).
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
1
Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
2
Press DIRECT on the receiver.
The analog audio is output.
Note
When headphone is connected, “HP DIRECT”
appears on the display.
PHONO 2ND ZONE
2CH A.F.D. MOVIE MUSIC
SLEEP
CATEGORY
MODE D. TUNING AUTO CAL
MULTI CH SOURCE
2CH
?/1
AUTO CAL MIC
SPEAKERS (OFF/A/B/A+B)
PHONES
MEMORY/ ENTER CATEGORY MODE – CATEGORY + 2CH A.F.D. MOVIE MUSIC
MULTI CHANNEL DECODING
TUNING MODE DISPLAY INPUT MODE
TUNING INPUT SELECTOR – +
TONE MODE
TONE – +
MULTI CH IN DIRECT
MASTER VOLUME
VIDEO 3 IN/PORTABLE AV IN
VIDEO L AUDIO R DIGITAL(OPT)
1 2
US01COV_STR-DG800-CEL.book Page 66 Tuesday, March 14, 2006 3:53 PM