Sega type twin F355 - Manual (Page 19)

12 www.seuservice.com
1
ASSEMBLING THE CABINET
Install the Joint Bracket L and 2 Joint Bracket R to the both sides of Front Cabinet, and 2 Joint
Pipes to the inside. At this time, temporarily install the Joint Brackets L and R.
Connect the wiring from the Front
Cabinet to the Rear Cabinet.
SCREW (1)
M4 X 8,w/flat & spring washers
JOINT BRACKET L
JOINT PIPE
Hexagon Bolt(2 each)
M8 X 30,w/spring washer,
flat washer used.
JOINT BRACKET R
Hexagon Bolt(4 each)
M8 X 20,w/spring washer,
flat washer used.
Hexagon Bolt(2) M8 X 30,w/spring washer, flat washer used.
FIG. 6. 1 a
Connect the Earth.
Connect the Connectors.
REAR CABINET side
FRONT CABINET side
FIG. 6. 1 b
1
2