Sega type twin F355 User Manual
Page 21
14
www.seuservice.com
TRUSS SCREW (3 each)
M6 X 30,flat washer used.
ROOF NUT PLATE F
ROOF NUT PLATE R
S H I P P I N G
BRACKET REAR
TAMPERPROOF SCREW (2)
M8 X 30
HEXAGON NUT
M8,flat washer used.
BILLBOARD
CENTER ROOF
TAMPERPROOF SCREW (2)
M8 X 30,flat washer used.
FIG. 6. 2
INSTALLING THE CENTER ROOF AND THE BILLBOARD
2
Put the Center Roof on its installation position.
Put each of Roof Nut Plates F & R on to the fixed portion of the Center Roof front and rear and
secure with 3 Truss screws for each.
Remove the Shipping Bracket Rear from the Rear Cabinet's ceiling. Remove the 2 pairs of
Tamperproof screws and Hexagon Bolts.
Secure the Billboard with the 2 Tamperproof screws (separately packed) and the 2 flat washers
which previously secured the Shipping Bracket Rear.
1
2
3
4