Sony RM-AV2500T - Manual (Page 35)

35 GB
Example: To store the On/Off
signal of an air-conditioner to
the SYSTEM CONTROL B button
1
Place the Commander head to
head with the remote control of
the air-conditioner.
2
While pressing COMMANDER
OFF, press PROGRAM + and
w
+.
Learnable SYSTEM CONTROL keys
and number keys flash in the display
panel.
If a signal has been learned on that
button, the display stays lit. If you
want to programme on that button,
clear the signal first (page 36).
RM-AV2500T
Remote control of
your air-conditioner
about 2 – 4 inches
(5 – 10 cm) away
PROGRAM
TV
CD MD
SAT VCR
TAPE
DVD
M1
CBL
M2
AMP
M3
PROGRAM
3
5
2
Programming a
Frequently Used Key
Operation for SYSTEM
CONTROL Buttons
In addition to their original System
Control functions (page 22), SYSTEM
CONTROL 1 – 9, A, B or C buttons can be
programmed to “learn” any remote
control signal.
As they operate independently from
other buttons, SYSTEM CONTROL 1 – 9,
A, B or C buttons can work as one-touch
buttons without any preceding operation
such as pressing a Component Select
button to select a component.
This is useful if you prefer having the
SYSTEM CONTROL button as a “one-
touch” button for a single operation
rather than executing a series of
commands.
Note
Some specific remote control signals may not
be learned. Refer to the operating instructions
supplied to the specific remote control as well.
Continued